邻苯二甲醛柱前衍生反相高效液相色谱法测定氨基酸类神经递质

以邻苯二甲醛柱前衍生,ODS(C_(18))柱分离,pH 6.0乙酸盐缓冲溶液与甲醇二元梯度洗脱,荧光检测,仅9min内分离测定了大鼠脑中5种氨基酸递质的含量。在1～10μmol·L~(-1)浓度范围内,氨基酸的峰面积与其浓度呈现良好的线性关系,相关系数在0.9978～0.9999之间。     

Analysis of citrates and benzoates used in poly(vinyl chloride) by supercritical fluid extraction and gas chromatography

Supercritical fluid extraction (SFE) has been demonstrated to be a useful tool in the determination of additives in polymeric materials. This paper describes the determination of some citrates and benzoates in poly(vinyl chloride) blended with 33–34% of plasticizer using off-line SFE followed by gas chromatography. Experimental factors affecting SFE have been studied by gravimetric analysis, followed by analysis of the extracts using a gas chromatograph equipped with a flame ionization detector. The extraction process is governed by the solubility of the plasticizers in the supercritical fluid or by their diffusion through the polymer matrix, which depend on the pressure and temperature used. Maximum extraction (>99%) is obtained at pressures and temperatures higher than 40 MPa and 80 °C, respectively. Due to purge losses, the collection efficiency of plasticizers into a liquid solvent ranges from 85 to 90%. The applicability of the SFE method is demonstrated using real samples and comparing the results with those obtained by conventional Soxhlet extraction.     

The Effect of Preparation Method and Calcination Temperature on the Crystallite Size and Surface Area of Perovskite-Type SrFeO x

We have investigated the synthesis of perovskite-type SrFeO_x (2.5 x 3.0) using three preparative methods: sol-gel, mechanochemical processing and solid state reactions at high temperature of the corresponding oxides. The sample obtained after calcination of the gel from sol-gel method, contained the least amount of strontium carbonate impurity. The amount of strontium carbonate impurity decreased with the increase in calcination temperature. Perovskites obtained have been characterized by X-ray diffraction (XRD) and nitrogen adsorption isotherms. Samples obtained from three methods have been compared with respect to calcination temperature, crystallite size and specific surface area.Issued as NRCC No. 46479.     

Characterization and complementation of a Pichia stipitis mutant unable to grow on d-xylose or l-arabinose

Pichia stipitis CBS 6054 will grow on d-xylose, d-arabinose, and l-arabinose. d-Xylose and l-arabinose are abundant in seed hulls of maize, and their utilization is important in processing grain residues. To elucidate the degradation pathway for l-arabinose, we obtained a mutant, FPL-MY30, that was unable to grow on d-xylose and l-arabinose but that could grow on d-arabinitol. Activity assays of oxidoreductase and pentulokinase enzymes involved in d-xylose, d-arabinose, and l-arabinose pathways indicated that FPL-MY30 is deficient in d-xylitol dehydrogenase (D-XDH), d- and l-arabinitol dehydrogenases, and d-ribitol dehydrogenase. Transforming FPL-MY30 with a gene for xylitol dehydrogenase (PsXYL2), which was cloned from CBS 6054 (Gen Bank AF127801), restored the D-XDH activity and the capacity for FPL-MY30 to grow on l-arabinose. This suggested that FPL-MY30 is critically deficient in XYL2 and that the d-xylose and l-arabinose metabolic pathways have xylitolas a common intermediate. The capacity for FPL-MY30 to grow on d-arabinitol could proceed through d-ribulose.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

Synthesis and structural characterisation of [(Ph3P)AuCo(CO)3(PPh3)]

Summary [(Ph₃P)AuCo(CO)₃(PPh₃)] has been synthesised from [(Ph₃P)AuCo(CO)₄], PPh₃v and Me₃NO in acetonitrile. Its molecular structure, determined by single-crystal x-ray crystallography, consists of an almost linear P-Au-Co-P arrangement in which the Co atom is in a slightly distorted trigonalbipyramidal geometry, with the Au and P atoms occupying the apical sites. The Au-Co bond length of 2.450(1) ? is shorter than that reported for [(Ph₃P)AuCo(CO)₄]. The carbonyl ligands are bent towards the Au atom and the mean Au-Co-C angle is 81(1)°.     

Formation of the unusual alkynyl carboxamide complex, C2H5N(H)C(O)CC[Co2(CO)6]CCo3(CO)9

The reaction of the cluster complex HCC[Co₂(CO)₆]CCo₃(CO)₉ with (or without) BrCCo₃(CO)₉ under Cadiot-Chodkiewicz coupling conditions gave the unusual alkynyl carboxamide complex C₂H₅N(H)C(O)CC[Co₂(CO)₆]CCo₃(CO)₉ rather than a coupled product containing two tricobalt cluster units. Steric demands imposed by the Co₃ cluster allow attack at the least hindered alkyne carbon and stabilise the formed ynamine, so allowing subsequent CO insertion. The product has been characterised by X-ray crystallography.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Synthesis and Reactions of 5-Amino-3-(3-methyl-5-oxo-1-phenyl-2-pyrazolin-4-yl)-7-phenyl-7 H -thiazolo[3,2- a ]pyrimidine-6-carbonitrile

5-Amino-3-(3-methyl-5-oxo-1-phenyl-2-pyrazolin-4-yl)-7-phenyl-7H-thiazolo[3,2-a]pyrimidine-6-carbonitrile was synthesized via the reaction of 4-(2-aminothiazol-4-yl)-3-methyl-1-phenyl-2-pyrazolin-5-one with benzylidene malononitrile and was then transformed to related fused heterocyclic systems. The antifungal and antibacterial studies revealed in some cases excellent biocidal properties.     

Kinetically inert transition metal complexes that reversibly bind to DNA

Transition metal complexes that reversibly bind to DNA have been studied for almost 30 years. In the last few years a variety of new systems have been developed, employing a range of metal ions and ligand architectures. In many cases, high affinity binding and specific selectivities have been observed. These complexes display properties that make them attractive as probes of DNA structure and function, suggesting that they may find a r?le as prototypical tools for a spectrum of applications, from basic molecular biology to medicine. This review presents an overview of some of the structures and properties of such complexes.